Valitse autosi: 
Näytetään kaikki tuotteet.
Audi 2.7T - OCT Intercooler kit.KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Sarja sisältää kaiken tarvittavan mm. asennusohjeet, putket yms. Coolereiden hinta asenettuna 2550€. Valmistaja OCT.Autoihin:
Audi-A6-C5 2.7T 230hp
Audi-A6-C5 2.7T 250hp
Audi-Allroad

Audi A3 1.9TDI - Forge TwintercoolerKLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
For the A3 , with the 2.0 litre TDi engine, we can offer a sure way to improve on the charge air cooling, by using the Forge "TWINtercooler". Our ground breaking innovation, first proven on the 2 litre FSit engines, features our unique parallel intercooler configuration, which adds greater cooling efficiency throughout the entire RPM band, beyond that of a single intercooler setup, but without any perceived increase in turbo lag. Autoihin:
Audi-A3-8P 1.9 TDI 105hp

Audi A3 2.0TDI - Forge TwintercoolerKLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
For the A3 , with the 2.0 litre TDi engine, we can offer a sure way to improve on the charge air cooling, by using the Forge \"TWINtercooler\". Our ground breaking innovation, first proven on the 2 litre FSit engines, features our unique parallel intercooler configuration, which adds greater cooling efficiency throughout the entire RPM band, beyond that of a single intercooler setup, but without any perceived increase in turbo lag. Valmistaja Forge.Autoihin:
Audi-A3-8P 2.0 TDI 140hp
Audi-A3-8P 2.0 TDI 170hp

Audi A3 2.0TFSI - Forge Front Mount "TWINtercooler" Kit KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Sarja sisältää kaiken tarvittavan mm. asennusohjeet, putket yms. Valmistaja Forge.Autoihin:
Audi-A3-8P 2.0 TFSI 200hp

Audi A4 B6 1.8T - OCT Frontmount Intercooler kit KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
This is a bolt-on installation. The payoff is cooler temperatures for your turbocharged air which means MORE POWER through all ranges, especially from the mid to upper ranges where the OEM intercoolers are simply overwhelmed. Mukana englanninkieliset asennus ohjeet. Saatavana vain sinisillä letkuilla Valmistaja OCT. Autoihin:
Audi-A4-B6 1.8T 150hp vm.2002-
Audi-A4-B6 1.8T 163hp vm.2002-

Audi S3 1.8T - Forge Front Mounting Intercooler kit KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Sarja sisältää kaiken tarvittavan mm. asennusohjeet, putket yms. Valmistaja Forge.Autoihin:
Audi-S3-1.8T

Audi S3 2.0TFSI - Forge Front Mount "TWINtercooler" Kit KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
For the new 2.0 L FSIT engines there is one sure way to improve on the charge air cooling by using the Forge \"TWINtercooler\" this ground breaking innovation features our unique twin-core design which has added greater efficiency throughout the entire RPM band beyond that of a single core setup, We have achieved this by using the latest core technology with high flow end tank designs to achieve a huge reduction in inlet temperatures. We spent many months testing various designs and the Twintercooler design emerged as the clear winner. This is a bolt-on kit that retains the use of the OEM alloy uprated intercooler to produce both horsepower AND torque, but more importantly, a HUGE reduction in inlet temperatures and increased flow efficiency. To download fitting instructions for this product: http://www.forgemotorsport.co.uk/media/FMINTS3FS(1).pdf . Please note this kit does NOT fit the 2009 facelift model\r\nAutoihin:
Audi-S3-2.0T

Audi S4 (B5) 2.7T - OCT Intercooler kit.KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Sarja sisältää kaiken tarvittavan mm. asennusohjeet, putket yms. Coolereiden hinta asenettuna 2550€. Valmistaja OCT.Autoihin:
Audi-S4-B5 2.7T 265hp

Audi TT 180hp - Forge Front Mount Intercooler KitKLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Forge saavuttanut testeisään tällä sarjalla n.10-18hv:n tehonlisäyksen vakio TT:ssä. Paketti sisältää kaiken asennukseen tarvittavat tarvikkeet ja asennusohjeet. Valmistaja Forge.Autoihin:
Audi-TT (mk1) vm.1998-2006-1.8T 180 hp 2WD
Audi-TT (mk1) vm.1998-2006-1.8T 180 hp quattro

Audi TT 2.0TFSI - Forge Twintercooler KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
"This is a bolt-on kit that retains the use of the OEM intercooler to produce both horsepower AND torque, but more importantly, a HUGE reduction in inlet temperatures and increased flow efficiency. A reduction in temps of up to a peak of 19 degrees Fahrenheit from 102 to 83 at 6600 RPM!" Valmistaja Forge.Autoihin:
Audi-TT (mk2) vm.2006--2.0 TFSI 200hp

Audi TT 225hp - Forge Front Mount Intercooler Kit KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Paketti sisältää kaiken asennukseen tarvittavat tarvikkeet ja asennusohjeet. Valmistaja Forge.Autoihin:
Audi-TT (mk1) vm.1998-2006-1.8T 225 hp quattro

Audi TT RS - Forge IntercoolerKLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
A larger and more efficient intercooler for the Audi TT RS. This kit is supplied with comprehensive instructions and ready to install. After installation we monitored gains up to 22hp on a standard car. Though more importantly the significant horsepower and torque gains were seen across the entire rev range making this a highly recommended upgrade. Autoihin:
Audi-TT (mk2) vm.2006--2.5 TFSI RS

BMW 120d ja 320d - Forge replacement FMICKLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
This uprated intercooler has been designed as a direct replacement on the 2 litre diesel versions of the 120D (E87,88 models) and the 320D ( E90,91,92,). With an increase in size and careful matching to a core of bar and plate design we have achieved a significant improvement over the OEM intercooler. For anyone who has had or planning to have an ECU software upgrade this is definitely advised. On our own test vehicle, which had been “mapped” we recovered over 10 hp over the original intercooler. The added benefit was the lower temperatures mean the engine is less stressed and more efficient.Autoihin:
Bmw-1-Series-(E87) - 120d 163hp
Bmw-1-Series-(E87) - 120d 177hp
Bmw-1-Series-(E87) - 120d
Bmw-3-Series-(E90/91/92/93) - 320d 163hp
Bmw-3-Series-(E90/91/92/93) - 320d 177hp

BMW 135 ja 335 - Forge replacement FMICKLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Saatavana mustilla ja sinisillä letkuilla. "This uprated intercooler has been designed as an upgrade on the 135 and 335 BMW models. After considerable trials with different intercoolers cores, we found that the most efficient for these models, was a core of bar and plate design, and along with an overall increase in dimensions we have been able to improve the cooling ability and reduce the pressure loss across when compared to stock. Our own testing was conducted on software tuned vehicles, to ensure that they would be working their hardest and the results showed inlet temperature reductions of up to 15 degrees centigrade. Owners and tuning shops have reported back with complete satisfaction, not only with the increased performance but also with the faultless install. The uprated intercooler is supplied with all parts required for the installation and comprehensive instructions. as can be seen, in comparison to the stock intercooler, the Forge unit is significantly larger." Asennusohje: http://www.forgemotorsport.co.uk/media/FMINT35.pdf .Autoihin:
Bmw-1-Series-(E82) - 135i
Bmw-3-Series-(E92) - 335i

Citroen DS3 - Forge Uprated Intercooler KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
The factory fitted Citroen DS3 intercooler is very small and located at the side of the radiator. It was possibley an afterthought for this model as Citroen fitted it with a fan to try and improve its performance. Our initial testing, of this original set up, showed very high inlet temperatures (60 deg C) from just a single dyno pull, so spirited driving or driving on track will likely result in even higher temperatures and a lack of power. Our development team have designed the Forge intercooler to optimise the space left over by the car designers that is otherwise wasted. The core is impressive at 600mm long and 70mm thick, yet careful selection of the core design results in no additional lag compared to the small stock core. During our testing on the dyno, we only recorded maximum inlet temperatures of just 30 deg C. ( that’s 30 degrees cooler) With more power and torque right through the midrange with gains of 39Nm and 13bhp. Unfortunately our test car was running a standard exhaust which proved very restrictive and we failed to realise the top end gains that would otherwise have been available. The addition of a better flowing exhaust would likely result in an even stronger midrange and gains right through the rev range. This kit is includes all the parts required, including a comprehensive set of instructions. With no cutting of the bumper required the installation time is around 4 hours for the home mechanic. \r\n\r\nAutoihin:
Citroen-DS3

Fiat 500 - Forge - Front Mounted Intercooler Kit KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Designed for all variants of the turbocharged Fiat 500, including the Abarth. A front mounting intercooler with all associated hoses, pipes and fittings, that replaces the existing side mounted intercoolers. This unit was developed to be suitable for those running standard turbos and ECU software (standard vehicle + 10 hp, +10 ft/lbs torque) and also those with larger turbo conversions. Whilst the factory set up using the two intercoolers in parallel is reasonably efficient, the removal of the long lengths of small bore pipework, quickly lowers the circuit resistance allowing you to benefit from the true capabilities of the turbocharger. Combining this with an increase in intercooler surface area and volume, along with siting the intercooler at the front of the vehicle, we really do have winner. Autoihin:
Fiat-500-1.4 Turbo Abarth

FIAT Grand Punto - Forge Front Mounting Intercooler KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
This replacement all alloy Front Mounting Intercooler for the FIAT Grand Punto 1.4 Tjet or 1.9 Mjet. It uses the original mountings to provide a simple and quick installation. The Intercooler has 30% more surface area and 40% more volume than the original it replaces. Our testing showed it ran 33%-50% cooler temperatures than the original. For anyone seeking better performance, especially those with a re-chip or software performance upgrade this is a must. Valmistaja Forge.Autoihin:
Fiat-Grande Punto -1.4 T-jet

Fiat Uno Turbo 1.3 - Forge Alloy Intercooler KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Valmistaja Forge.Autoihin:
Fiat-Uno Turbo-1.3

Fiat Uno Turbo 1.4 - Forge Alloy Intercooler KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Valmistaja Forge.Autoihin:
Fiat-Uno Turbo-1.4

Focus RS Mk2 - Forge Uprated intercooler KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
If you are looking to upgrade the intercooler on your MK2 Focus RS, we really do have a winner here. With a significant increase in overall size and thickness, compared to the standard interccoler,(see image) this really does make a difference even on a standard car. Our repeated dyno testing showed mid range improvements of up to 15hp and 27Nm of torque with the top end increased by 8 hp and 13Nm. The intercooler has been designed not to mask the coolant radiator and during testing we did not see any increase in coolant temperatures. Installation is easy with removal and fitment achievable from under the vehicle without the need to remove the front panel. The MK2 Focus RS responds really well to this modification , and the best news is that by reducing temperatures to get more power you are actually reducing stress on the engine.Autoihin:
Ford-Focus RS-Mk 2

Ford Escort RS Turbo Series 1 - Forge Alloy Intercooler (Exchange) KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Valmistaja Forge.Autoihin:
Ford-Escort

Ford Escort RS Turbo Series 2 - Forge Twin Core Alloy Intercooler KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Valmistaja Forge.Autoihin:
Ford-Escort

Ford Focus ST225 - BSR IntercoolerKLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Valmistuttaja BSR.Autoihin:
Ford-Focus ST225

Ford Focus ST225 - Forge Race Spec Intercooler KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
\"For those that require the ultimate cooling on their Focus ST we have our extra large Race Intercooler. Again we have used the latest core technology and high flow end tank designs to achieve a huge reduction in inlet temperatures, but we have made it even bigger to suit race applications where the maximum cooling efficiency is required. Testing consistantly showed in excess of 35 degrees difference in cooling efficiency over the original unit . Although this unit is greater in size than our normal road use upgrade (FMINTFSTI) it can still be installed without the need for any cutting of the front panels.\" Valmistaja Forge.Autoihin:
Ford-Focus ST225

Ford Focus ST225 - Forge Front Mounted Intercooler Kit KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Vakiopaikalle sopiva. "Following on from our market leading Forge Cosworth intercoolers here is the new, larger capacity, intercooler for the Focus ST. We have used the latest core technology and high flow end tank designs to achieve a huge reduction in inlet temperatures ( up to 25 - 30 degrees difference in cooling efficiency over the original unit ). This intercooler is a great upgrade for both the standard or modified Focus." Valmistaja Forge.Autoihin:
Ford-Focus ST225

Ford Sierra Cosworth RS 500 Style - Forge Alloy Intercooler KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Saatavana kolme eri mallia riippuen mikä auto on kyseessä: FMINT097 2wd/4wd Sierra Cosworth, FMINT097 A Escort Cosworth, FMINT097 B RS500 (real) Kaikki sarjat saman hintaisia! Valmistaja Forge.Autoihin:
Ford-Escort -RS
Ford-Sierra-Cosworth

Lancia Delta / Integrale / Evo / 16V - Forge Alloy Intercooler KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Valmistaja Forge.Autoihin:
Lancia

Landrover Defender TD5 - Forge IntercoolerKLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
An uprated Front Mounting Intercooler for the Defender TD5 engined vehicles. This is suitable for all variants ie with or without air conditioning, manual or automatic. Significant improvements are achieved using this intercooler with the reduction in air intake temperatures leading to power gains. When combined with a software or tuning box upgrade, 195 to 200 bhp is readily achievable. The intercooler is installed using the original OEM mountings and hoses, without the need for modifications, making this a quick and simple installation. If you use your vehicle for towing, this intercooler upgrade is highly recommended. Valmistaja Forge.Autoihin:
Land Rover-Defender-TD 5

Landrover Discovery ja Defender 200/300 Tdi - Forge Intercooler KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
A Front Mounting Intercooler for the 200 or 300 Tdi Discovery or Defender. This is a sure way to gain power and a must for those running tuning boxes or performance software. Please note that this Intercooler will NOT fit those models with Air Conditioning. Valmistaja Forge.Autoihin:
Land Rover-Defender-200 Tdi
Land Rover-Defender-300 Tdi
Land Rover-Discovery-200 Tdi
Land Rover-Discovery-300 Tdi

Mazda MPS 3 - Forge Uprated Intercooler KitKLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Saatavana sinisillä tai mustilla letkuilla, ilmoita haluamasi väri tilauksen yhteydessä! " A complete kit for the Mazda 3 MPS (or Mazdaspeed) including alloy hard pipes,silicone hoses, clamps, fittings and a high performance front mounting intercooler, togehter with detailed full colour fitting instructions. The standard intercooler suffers with heatsoak after sitting in traffic and has a slow recovery rate after high engine speed due to its location. Our front mount intercooler allows the intercooler to be permanently cooled by a good flow of cold air, whilst not adding any additional lag. Spool-up remains as quick as with the top mount, but with the added benefit of more torque through the mid-range (over 20ft/lb increase on our car from 3000-5500rpm) and a useful gain in power too (our car made over 10bhp from 3000-5500rpm) with no other modifications. "Autoihin:
Mazda-MPS 3

Mini Cooper S - Forge uprated Intercooler (Polished)KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
"With this Intercooler offering up to a 29% reduction over the original equipment it is a must for those wishing to increase engine power. " Valmsitaja Forge.Autoihin:
Mini -Cooper-S

Mini Cooper S - Forge uprated Intercooler.KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
At Autosport 2005 we are proud to release our uprated Intercooler for the BMW Mini Cooper S. After a comprehensive development program involving thorough testing in various environments we are convinced that you will not find a superior Intercooler for this application. Our development program included the use of many types of Intercooler core and end tank designs. At the initial stages we ran two development projects alongside each other, one an air to air Intercooler and the other an air to water Chargecooler system. The air to air development achieved significantly improved temperature reductions in comparison, which convinced us to solely concentrate on this option. At each stage of development testing was conducted using a vehicle in various states of tune. (With and without, performance software, supercharger reduction pulleys, bonnet scoops and performance air intake systems.) With this Intercooler offering up to a 29% reduction over the original equipment it is a must for those wishing to increase engine power. Valmistaja Forge.Autoihin:
Mini -Cooper-S

Mini Cooper S R60 - Forge Intercooler KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
This uprated intercooler has been designed as an upgrade Mini Countryman Cooper S models. After considerable trials with different intercoolers cores, we found that the most efficient for these models, was an intercooler of bar and plate design, and along with a significant overall increase in dimensions we have been able to improve the cooling ability and reduce the pressure loss across when compared to stock.\r\nOur own road and dyno testing showed that our intercooler was twice as efficient as the original intercooler with the inlet temperatures halved. The uprated intercooler is supplied with all parts required for the installation and comprehensive instructions. Asennusohjeet:http://www.forgemotorsport.co.uk/media/FMINTR60.pdf . Valmistaja Forge.Autoihin:
Mini -Cooper Countryman
Mini -Cooper-S 1.6i Turbo
Mini -Cooper-S Clubman 1.6i Turbo

Mini Cooper S Turbo (R56) vm.2007 - 2009 - Forge Uprated Alloy Intercooler KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
For the 2007 to 2009 models not 2010 (R56/R57) !! BMW Mini Cooper S Turbo we have developed a more efficient intercooler. As a reduction in intake air temperature increases the density of the charge mixture within the combustion cylinder any temperature reductions will equate to more power. This intercooler is constructed using a combined 80/40mm high thermal efficiency core, with a 250% larger surface area and a 125% thicker base core, to achieve the best possible results. As you can see from the graph below we have achieved a significant reduction in temperature. In fact even in relatively low road speeds / air velocities our intercooler was able to better the OEM unit by nine degrees centigrade, with greater improvements being achievable during greater speeds during track testing. The replacement intercooler is supplied with all the mountings and a replacement lower grill to allow ease of installation. Please note that this kit has been designed to fit behind the original Cooper S front panel. If an alternative aftermarket front panel has been installed, where clearances are reduced, additional trimming may be required. Asennusohjeet: http://www.forgemotorsport.co.uk/media/FMINTR56v2.pdf . Valmistaja Forge. Autoihin:
Mini -Cooper-S 1.6i Turbo

Mitsubishi Colt CZT - Forge Front Mounting Intercooler KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
We really have been impressed with this car, especially after our development team got their hands on it. The creation of an \"EVO style\" front mounting intercooler has not only increased performance but also makes the car far more agressive in looks. Everything needed to install our intercooler is supplied and as you can see from the graph below, the reduction in inlet temperature (more power resulting) means that this upgrade is really worthwhile. An average of the many test runs performed, comparing the inlet and outlet temperatures with the OEM intercooler is displayed on the graph below. asennuohjeet: http://www.forgemotorsport.co.uk/media/CZTINT.pdf .Autoihin:
Mitsubishi-Colt-CZT

Mitsubishi EVO 10 - Forge Uprated intercooler KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
"We have seen excellent results on both the FQ300 and the FQ360. On the FQ300 we recorded gains of 13bhp and 18lb/ft of torque in back to back testing, with noticeable gains all the way from 3000 to 7000rpm. The manifold intake temperatures were reduced by 10 degrees centigrade with an overall drop in the resistance of the cooling system, meaning that the turbo now works less hard at the same power levels. On the FQ360 we recorded a significant increase in power of +12hp, with an increase in torque from 4500rpm, again pulling strongly to the redline.".kts. tarkemmat tiedot: http://www.forgemotorsport.co.uk/content.asp?inc=product&cat=&product=FMINTEV10 .Autoihin:
Mitsubishi-Lancer Evolution-X

Mitsubishi Evo 4/5/6 - Forge Alloy IntercoolerKLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Valmistaja Forge.Autoihin:
Mitsubishi-Lancer Evolution-IV
Mitsubishi-Lancer Evolution-V
Mitsubishi-Lancer Evolution-VI

Nissan GTR R35 - Forge Front Mounted IntercoolerKLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
"This front mounting intercooler has been designed as an upgrade for the Nissan GTR R35 models. After considerable trials, we found that the most efficient for these models, was a core of tube and fin design, and along with an overall increase in dimensions we have been able to improve the cooling ability and reduce the pressure loss across when compared to stock intercoolers. Our own testing was conducted on software tuned vehicles, to ensure that they would be working their hardest and the results showed both a reduction in inlet temperature, an increase in horsepower asnd torque. The uprated intercooler is supplied with all parts required, including mandrel bent 70mm pipework, silicon hoses, all clips, bolts, and nuts together with comprehensive instructions. "Autoihin:
Nissan-GT-R R35

Opel Astra OPC (vm.2006-) - Forge Front Mounting Intercooler Kit KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
"This Intercooler kit has been produced for the 2006 onwards Astra VXR ( H chassis). The kit includes everything required. All the pipework is 60mm dia, with polished alloy hard pipes and re-inforced silicone hoses. Along with all the brackets and fixings, there is a simple to follow set of instructions. During our development testing the intake temperatures on this intercooler, didn’t exceed 30 degrees C, even under load at full throttle at high rpm." Valmistaja Forge. Autoihin:
Opel-Astra H-2.0T 240hp

Opel Corsa VXR - Forge Uprated front mounted intercoolerKLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
The Forge Motorsport front mounting intercooler kit for the Corsa VXR is more than twice as big as the stock intercooler. It includes a FULL replacement pipe run in 60mm silicon and aluminium for miniumum restriction, and future proofing for any future engine tuning. Repeated dyno runs showed an increase on average of 10bhp and 10ft/lb with no other modifications, and with intake temperatures around 30 degrees C cooler than with the stock intercooler. On chipped cars the gains will be even more dramatic. This kit comes complete with all parts needed for the installation, and a full set of colour instructions. \r\n\r\nAutoihin:
Opel-Corsa

Peugeot 207 GT - Forge Front Mounting Intercooler Kit KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
For the new Peugeot 207 Gt Turbo, there is one sure way to improve performance and that is with the Forge front Mounting intercooler Kit. With a reduction in temperatures of up to 10 degrees Fahrenheit at 6000 RPM you get more power from your engine. This kit contains all the parts required to make the installation easy. Asennusohjeet: http://www.forgemotorsport.co.uk/media/Peugeot207TurboFMIC(1).pdf . Valmistaja Forge.Autoihin:
Peugeot-207-GT Turbo

Porsche 996 - Forge Uprated intercooling kitKLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
We started with improving airflow through the intercoolers with the use of enlarged 60mm silicone hoses, and a redesign of the intercooler end tanks. Then with the charge air sorted, we looked at the cooling air that passes over the intercooler. Our testing showed that the original OEM ducting performed brilliantly so satisfied that it was up to the specification needed we thought we should aim to make a true directly replacement kit, by designing the intercoolers to install perfectly with all the OEM mountings. The new ‘coolers are similar in dimension to the OEM units, but are measurably thicker. The real improvement came with a complete re-design of the intercooler core after our preliminary tests proved a bar and plate design to be more thermally efficient in this installation. Comparing the peak power figures only tells half the story. As the car comes on boost at 4500rpm it peaks at over 500bhp, 40bhp above the power the car makes at the same RPM with OEM coolers, maintaining close to this peak figure all the way to the redline. Also of real interest is how the torque continues to climb where the stock cooler run maxed out and a higher torque figure is sustained all the way to the redline. The full throttle fuelling is also spot on, initially richer as the car comes on boost, settling down perfectly as the revs increase.” \r\nYou can read the full Regal Autosport blog at \r\nhttp://regal-auto.co.uk/blog/?p=1429 . Valmistaja Forge.\r\n\r\n\r\n\r\n\r\nAutoihin:
Porsche-996 - GT 2
Porsche-996 - Twin Turbo S
Porsche-996 - Twin Turbo

Renault 5 GT Turbo - Forge Alloy Single Core Alloy Intercooler KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Valmistaja Forge.Autoihin:
Renault -GT 5

Renault 5 GT Turbo - Forge Alloy Twin Core Alloy Intercooler KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Valmistaja Forge.Autoihin:
Renault -GT 5

Renault 5 GT Turbo - Forge Front Mount Alloy Intercooler & Full Pipe Run KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Sarja tarkoitettu vakio puskuriin ilman muutostöitä sopivaksija Sarjan asennus ei vaadi sumuvalojen poisjättämistä. Valmistaja Forge.Autoihin:
Renault -GT 5

Renault Megane 225 - Forge Front Mounted Intercooler Kit KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Vakio coolerin tilalle vaihdettava jäähdytyspinta-alaltaan huomattavasti suurempi cooleri kun vakio. Kuvassa vakio ja Forgen vastaava. Valmistaja Forge.Autoihin:
Renault -Megane

Renault RS 250 - Forge Uprated Intercooler KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
This uprated intercooler is 80% larger than the original fitment intercooler but is easily installed in under 2 hours utising the original hoses and mountings. On our test vehicles the greater cooling efficiency consistantly gave an increase of 10 hp on a standard engine with greater benefits on tuned vehicles depending on the remapping software used. The intercooler is of a open core design so as not to restrict airflow to the engine cooling system. We have also ducted the intercooler to maximise the through flow which aids both the intercooler and the coolant radiator. If you are simply after maximising the power of your RS for road use or have embarked on a fully tuned competition vehicle, this has to be the right choice. Autoihin:
Renault -Megane

Saab 9-3 SX 1.8/2.0Turbo ( vm.2003- ) - Forge IntercoolerKLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Valmistaja Forge.Autoihin:
Saab-9-3 SS / SC / X-1.8T 150hp
Saab-9-3 SS / SC / X-2.0T 175hp
Saab-9-3 SS / SC / X-2.0T 210hp

Saab 9-3 SX 2.8T V6 ( vm.2003- ) - Forge IntercoolerKLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Valmistaja Forge.Autoihin:
Saab-9-3 SS / SC / X

Saab 9-5 T (vm.1998-) - Forge Uprated intercooler KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
An uprated replacement alloy intercooler for the Saab 95 (from 1998 onwards) designed to reduce intake air temperatures and increase performance. Valmistaja Forge.Autoihin:
Saab-9-5 (vm.- 2010)-2.0T 150hp
Saab-9-5 (vm.- 2010)-2.3T 170hp
Saab-9-5 (vm.- 2010)-2.3T 185hp

Saab 900T vm.1994-98 ja 9-3T vm.1998-02 - Uprated intercooler KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Valmistaja Forge.Autoihin:
Saab-9-3
Saab-900

Seat Ibiza 1.9TDI 100 PD - Forge Front Mounting Intercooler Kit KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Sarja sisältää kaiken tarvittavan mm. asennusohjeet, putket yms. Valmistaja Forge.Autoihin:
Seat-Ibiza (6L) - (vm.2003-2008)

Seat Ibiza 1.9TDI 130 PD - Forge Front Mounting Intercooler Kit KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Sarja sisältää kaiken tarvittavan mm. asennusohjeet, putket yms. lisää tietoa: http://www.forgemotorsport.co.uk/content.asp?inc=product&cat=0013&product=FMINTSIPD . Valmistaja Forge.Autoihin:
Seat-Ibiza (6L) - (vm.2003-2008)-1.9TDI PD 130hp

SEAT Ibiza Bocenegra - Forge Intercooler Kit KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
This is a complete intercooler kit for the SEAT Bocenegra. All parts are included - hoses, mountings etc. If you are just after improving the efficiency of the engine, or are seeking better cooling after a software upgrade (re-chip), this kit is the answer. Our Dyno-testing, on a standard vehicle achieved peak +10 bhp, with greater power and torque all the way from 1600rpm to the redline. Further gains would be expected on a re-chipped vehicle where the OEM intercooler falls from its design ability.\r\nAutoihin:
Seat-Bocanegra

Seat Ibiza MK3 1.8T - Forge Front Mounting Intercooler Kit KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Sarja sisältää kaiken tarvittavan mm. asennusohjeet, putket yms. Lisää tietoa: http://www.forgemotorsport.co.uk/content.asp?inc=product&cat=190101&product=FMIBFMIC . Valmistaja Forge.Autoihin:
Seat-Ibiza (6K) - (vm.1993-2002)-1.8T

Seat Ibiza MK4 1.8T FR - Front Mounting Intercooler KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Sarja sisältää kaiken tarvittavan mm. asennusohjeet, putket yms. Valmistaja Forge.Autoihin:
Seat-Ibiza (6L) - (vm.2003-2008)

Seat Leon / Toledo 1.8T - Forge FMIC Intercoolersarja.KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Sarja sisältää: Coolerin, silikooniletkut, kiinikkeet, pannat, uuden puskurinrunkopalkin ja asennusohjeet asentamiseen. Vakio 1.8T autosta saadaan pelkästään tällä cooler sarjalla +15hp. Lisää dataa osoitteessa: http://www.forgemotorsport.co.uk/content.asp?inc=product&cat=190201&product=FMSEAFMIC . Tarkoitettu vain autoihin joissa ei ole lampun pesimiä. Valmistaja Forge.Autoihin:
Seat-Leon (1M) - (vm.1999-2005)-1.8T 20VT 180hp
Seat-Toledo 2 (vm.1999-2004)-1.8T 180hp

Seat Leon Cupra R - Forge Big Race Intercooler KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
"This intercooler kit has been specially designed for those running a bigger turbo or contemplating one in the future. Whilst the quality of the original two side mounting intercoolers are excellent on a standard car, you are pushing them beyond their design criteria with greater pressure and flow rates on a modified car. For those wishing to gain the maximum increases from their engines where larger turbochargers have been installed, or just want the biggest intercooler available, this has to be the answer."Autoihin:
Seat-Leon (1M) - (vm.1999-2005)-1.8T Cupra R 210hp
Seat-Leon (1M) - (vm.1999-2005)-1.8T Cupra R 225hp

Seat Leon Cupra R - Forge Front Mounting Intercooler kit KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Sarja sisältää kaiken tarvittavan mm. asennusohjeet, putket yms. Lisää tietoa osoitteessa: http://www.forgemotorsport.co.uk/content.asp?inc=product&cat=190202&product=FMINTLCR . Valmistaja Forge.Autoihin:
Seat-Leon (1M) - (vm.1999-2005)-1.8T Cupra R 210hp
Seat-Leon (1M) - (vm.1999-2005)-1.8T Cupra R 225hp

Seat Leon tai Altea 2.0TFSI - Forge Front Mount "TWINtercooler" Kit KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Sarja sisältää kaiken tarvittavan mm. asennusohjeet, putket yms. Lisää tietoa Leoniin osoitteessa: http://www.forgemotorsport.co.uk/content.asp?inc=product&cat=&product=FMINTLFS ja asennusohjeet Leoniin: http://www.forgemotorsport.co.uk/media/FMINTLFS%20instructions.pdf . Valmistaja Forge.Autoihin:
Seat-Altea-2.0 TFSI 200hp
Seat-Leon (1P) - (vm.2005-)-2.0 TFSI FR 185hp
Seat-Leon (1P) - (vm.2005-)-2.0 TFSI FR 200hp

Seat Sport Intercooler - Forge - Fitting Kit - ( Black )KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Sarjassa mukana kaikki tarvittava osat (10-klemmaria, alumiini-, silikooniputket ja liitossovitteet) paitsi tarvittava Seat Sportin alkuperäiscooleri. "This fitting kit contains all the parts required to install the SEAT Sport Front Mounting Intercooler (NOT INCLUDED) to your SEAT Ibiza, 130pd and 1.8tFR. You will however need to purchase the SEAT Sport Front Mounting Intercooler and mounting brackets from a SEAT dealer, this kit will then allow complete fitting up to the standard intake connections on the car." Mahdollinen postikulu +13.20€. Valmistaja Forge.Autoihin:


Seat Sport Intercooler - Forge - Fitting Kit - ( Blue )KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Sarjassa mukana kaikki tarvittava osat (10-klemmaria, alumiini-, silikooniputket ja liitossovitteet) paitsi tarvittava Seat Sportin alkuperäiscooleri. "This fitting kit contains all the parts required to install the SEAT Sport Front Mounting Intercooler (NOT INCLUDED) to your SEAT Ibiza 130pd and 1.8tFR. You will however need to purchase the SEAT Sport Front Mounting Intercooler and mounting brackets from a SEAT dealer, this kit will then allow complete fitting up to the standard intake connections on the car." Mahdollinen postikulu +13.20€. Valmistaja Forge.Autoihin:
Seat-Ibiza (6L) - (vm.2003-2008)-1.8T FR 150hp
Seat-Ibiza (6L) - (vm.2003-2008)-1.9TDI PD 130hp

Skoda Fabia RS PD130 - Forge Diesel Front Mount Intercooler KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Sarja sisältää kaiken tarvittavan mm. asennusohjeet, putket yms. HUOM. Cooleri mahdollista tilata myös integroidulla Blow-off ventiilillä! Valmistaja Forge.Autoihin:
Skoda-Fabia-1.9 TDI PD RS 130hp

Skoda Octavia 1.8T - Forge Front Mounting Intercooler Kit KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Sarja sisältää: Coolerin 300 x 500 mm , silikooniletkut, kiinikkeet, pannat, uuden puskurinrunko palkin(vaihto-osa) ja asennusohjeet. Vakio 1.8T autosta saadaan pelkästään tällä coolersarjalla +15hp. Ei merkittävää ahtopaineen laskua. Tarkoitettu vain autoihin joissa ei ole lampun pesimiä. Valmistaja Forge.Autoihin:
Skoda-Octavia-1.8T 150hp
Skoda-Octavia-1.8T RS 180hp

Skoda Octavia RS 2 - Forge Front Mount "TWINtercooler" Kit KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Sarja sisältää kaiken tarvittavan mm. asennusohjeet, putket yms. Lisää tietoa osoitteessa: http://www.forgemotorsport.co.uk/content.asp?inc=product&cat=200102&product=FMINTOFS . Valmistaja Forge.Autoihin:
Skoda-Octavia 2-2.0 TFSI RS 200hp (vm.2006-2009)

Universal 100 Series Alloy Intercoolers - 60mm Core KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Kaikissa malleissa Core Dimensions: 500 x 60 x 175mm. Ulkomitat Type 04 = 680 x 80 x 200, Type 05 = 650 x 80 x 223, Type 06 = 650 x 115 x 200, Type 07 = 665 x 115 x 200, Type 08 = 680 x 80 x 200 ja Type 09 = 680 x 80 x 200. Valmistaja Forge.Autoihin:


Universal 200 Series Alloy Intercoolers - 80mm Core KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Kaikissa malleissa Core Dimensions: 500 x 80 x 175mm. Ulkomitat Type 04 = 680 x 90 x 200, Type 05 = 670 x 90 x 223, Type 06 = 670 x 125 x 200, Type 07 = 675 x 125 x 200, Type 08 = 680 x 90 x 200 ja Type 09 = 680 x 90 x 200. Valmistaja Forge.Autoihin:


Universal 300 Series Alloy Intercoolers - 60mm Core KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Kaikissa malleissa Core Dimensions: 600 x 60 x 295mm. Ulkomitat Type 04 = 780 x 80 x 320, Type 05 = 750 x 80 x 343, Type 06 = 750 x 115 x 320, Type 07 = 765 x 115 x 320, Type 08 = 780 x 80 x 320 ja Type 09 = 780 x 80 x 320mm. Valmistaja Forge.Autoihin:


Universal 400 Series Alloy Intercoolers - 80mm Core KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Kaikissa malleissa Core Dimensions: 600 x 80 x 295mm. Ulkomitat Type 04 = 780 x 90 x 320, Type 05 = 770 x 90 x 343, Type 06 = 770 x 125 x 320, Type 07 = 775 x 125 x 320, Type 08 = 780 x 90 x 320 ja Type 09 = 780 x 90 x 320. Valmistaja Forge.Autoihin:


Universal E Series Alloy Intercoolers - 485 x 60 x 285 mm Core KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Kaikissa malleissa Core Dimensions: 485 x 60 x 285mm. Ulkomitat Type E04 = 595 x 80 x 290, Type E05 = 635 x 80 x 290, Type E06 = 635 x 80 x 290, Type E08 = 595 x 80 x 290 ja Type E10 = 635 x 80 x 290. "Forced induction (compression of inlet air) produces heat. Heat can reduce power thus negating some of the benefits of forced induction in the first place. Incorporating an intercooler between the compressor and the plenum chamber greatly reduces the adverse effects of elevated air inlet temperatures. Forge Motorsport’s range of universal intercoolers begin with efficient cores sized to fit many forced induction applications. From there, a wide selection of end tank configurations offer numerous installation solutions. Using the highest quality cores, hand fabricated and welded by highly skilled craftsmen, our intercoolers offer excellent thermal properties, flow characteristics, minimal pressure drop and high volumetric efficiency. This is all at a price considerably lower than one might expect to pay for intercoolers with this level of quality, size and performance. We can also offer custom designed intercoolers manufactured to your specifications and at prices well below what other manufactures charge for ‘off the shelf’ designs. Contact us for more details" Valmistaja Forge.Autoihin:


VAG 1.8TT - Forge Intercooler vakiopaikalle vakion tilalle!KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Asennetaan vakiocoolerin tilalle! Ei vaadi rakeenteellisia muutoksia. Käsityönä tehty. Pinta-alan lisäys vakio cooleriin nähden: 27mm x 5mm x 15mm. Imuilman lämpötilan lasku vakioon nähden -6-9 DegC " Designed by Forge to replace your OEM intercoolers this all alloy intercoolers is an easy install. Pressure loss reduction: 2psi. The Forge intercooler is 27mm X 5 MM X 15MM bigger than the OEM....... and with excellent air flow characteristics inside the end tanks this upgrade is must." Valmistaja Forge.Autoihin:
Audi-A3-8L 1.8 T vm.1996-1999
Audi-A3-8L 1.8 T vm.1999-2003
Seat-Leon (1M) - (vm.1999-2005)-1.8T 20VT 180hp
Skoda-Octavia-1.8T 150hp
Skoda-Octavia-1.8T RS 180hp
VW-Bora-1.8T DBW 150hp
VW-Golf 4-1.8T DBW 150hp vm.2000-
VW-Golf 4-1.8T DBW 180hp

VW Golf 1.8T - Forge Alloy Front Mount Intercooler Kit KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Sarja sisältää kaiken tarvittavan mm. asennusohjeet, putket yms. Lisää tietoa sarjasta osoiteesta : http://www.forgemotorsport.co.uk/content.asp?inc=product&cat=260301&product=FMINTMK4F . Valmistaja Forge.Autoihin:
VW-Golf 4-1.8T DBW 150hp vm.2000-

VW Golf 4 1.9TDI 130hp - Forge front mounting Intercooler KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
After receiving reports from owners, and seeing the results of our own testing, it really is evident that the Golf PD130 TDI really needs help in the intercooler department. Owners were complaining of high intake temperatures and pipes that kept blowing off, so we've set out to fix both problems. Our testing results with this cooler are excellent, it runs much cooler than stock, and our unique hose design means an end to hoses blowing off under boost ! The kit includes everything required, including easy to understand instructions. Asennus ohjeet: http://www.forgemotorsport.co.uk/media/FMINTMK4PD.pdf . Vaömistaja ForgeAutoihin:
VW-Golf 4-1.9 TDI PD 130hp

VW Golf GT 1.4 TSI - Forge Twintercooler KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Sarja sisältää kaiken tarvittavan mm. asennusohjeet, putket yms. Lisää tietoa osoitteessa: http://www.forgemotorsport.co.uk/content.asp?inc=product&cat=&product=FMINT14TS ja asennusohjeet: http://www.forgemotorsport.co.uk/media/GOLF%20GT%20TWINTERCOOLER.pdf . Valmistaja Forge.Autoihin:
VW-Golf 5

VW Golf GTI MK5 - Forge Front Mount "TWINtercooler" Kit KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
"TWINtercooler" this ground breaking innovation features our unique twin-core design which has added greater efficiency throughout the entire RPM band beyond that of a single core setup, We have achieved this by using the latest core technology with high flow end tank designs to achieve a huge reduction in inlet temperatures. We have spent many months testing various designs and the Twintercooler design emerging as the clear winner. This is a bolt-on kit that retains the use of the OEM intercooler to produce both horsepower AND torque, but more importantly, a HUGE reduction in inlet temperatures and increased flow efficiency. A reduction in temps of up to a peak of 20 degrees Fahrenheit from 102 to 82 at 6600 RPM!Autoihin:
VW-Golf 5-2.0 TFSI 200hp

VW Golf GTI MK6 - Forge Front Mount "TWINtercooler" Kit KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Forge are pleased to present the \"TWINtercooler\" for the Golf MK6 2 litre. This intercooler is based on our proven design which adds greater efficiency throughout the entire RPM band beyond that of a single intercooler setup, We have achieved this by using the latest core technology with high flow end tank designs to achieve a huge reduction in inlet temperatures. This is a bolt-on kit that retains the use of the OEM intercooler to produce both horsepower AND torque, but more importantly, a HUGE reduction in inlet temperatures and increased flow efficiency. A reduction in temps of up to a peak of 19 degrees Fahrenheit at 6500 RPM! This kit includes all the necesary silicone hoses, clamps and mounting brackets that are required.Autoihin:
VW-Golf 6-2.0 TFSI 211hp GTI

VW Golf R MK6 - Forge Front Mount "TWINtercooler" Kit KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
This installation is similar to all our other intercoolers for the transverse FSI and TSI VAG engines with the addition of a second front mounted core in a parallel configuration to the existing OEM front mount. This provides for the greatest possible cooling efficiency with the least negative side effects and least modification to the vehicle for installation. This particular kit is completely unique to the Golf R application, sharing no other parts with any other TWINtercooler kit we offer. Due to some unique space constraints of the MK6 Golf R platform, this kit has a unique core, which is slightly thinner than our other cores, but it is also wider and taller, giving it overall more surface area for heat dissipation. The end tanks and mounting brackets are also unique to this application. Before and after Dyno testing quickly showed the significant gains of this intercooler were achieved in the upper range, whilst on road testing highlighted the reduction in inlet temperatures . Those involved could not believe how well this intercooler worked so well in combination with the performance software upgrade, with the engine continuing to pull hard where it had previously felt as if the power flattened off. \r\n\r\nAutoihin:
VW-Golf 6-2.0 TFSI R 270hp

VW Passat 2.0TFSI - Forge Front Mount "TWINtercooler" Kit KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Sarja sisältää kaiken tarvittavan mm. asennusohjeet, putket yms. Saatavana mustan, sinisen ja punaisen värisillä letkuilla. For the new 2.0 L FSIT engines there is one sure way to improve on the charge air cooling by using the Forge "TWINtercooler" this ground breaking innovation features our unique twin-core design which has added greater efficiency throughout the entire RPM band beyond that of a single core setup, We have achieved this by using the latest core technology with high flow end tank designs to achieve a huge reduction in inlet temperatures. We spent many months testing various designs and the Twintercooler design emerged as the clear winner. This is a bolt-on kit that retains the use of the OEM intercooler to produce both horsepower AND torque, but more importantly, a HUGE reduction in inlet temperatures and increased flow efficiency. A reduction in temps of up to a peak of 19 degrees Fahrenheit from 102 to 82 at 6600 RPM! Asennusohjeet: http://www.forgemotorsport.co.uk/media/FMINTB6PASinst.pdf . Valmistaja Forge.Autoihin:
VW-Passat (B6) - (vm.2005-)-2.0 TSI 200hp

VW Polo 1.8T - Forge FMIC kitKLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Tilattavissa mustilla, sinisillä ja punaisilla letkuilla. sarja sisältää kaiken taervittavan sen asentamiseksi. www.forgemotorsport.co.uk/content.asp?inc=product&cat=260501&product=FMINTPOLO . Valmistaja Forge.Autoihin:
VW-Polo-1.8T GTI 150hp

VW Scirocco 1.4 TFSi - Forge Twintercooler KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
The latest VW Scirocco with the 1.4 TSI petrol engine is now catered for with our market leading 'Twintercooler' - a design that runs our front mounted intercooler in parallel with the existing stock intercooler for amazing cooling power. This Twintercooler gave a significant drop in intake temperature especially on our chipped development car. On an independant rolling road with this intercooler fitted we had recovered 10 bhp over the OEM intercooler installation, and in combination with our Forge intake we were 17 bhp up on the pre-intallation run.Autoihin:
VW-Scirocco-1.4 TSI 122hp
VW-Scirocco-1.4 TSI 160hp

VW Scirocco 2.0 TSI - Forge TwintercoolerKLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
The latest VW Scirocco with the 200PS 2.0 TSI petrol engine is now catered for with our market leading 'Twintercooler' - a design that runs our front mounted intercooler in parallel with the existing stock intercooler for amazing cooling power. Giving a drop in ambient (cruise) temperatures of 5 degrees centigrade and boosted drops of over 15 degrees centigrade, this is a sure way of keeping your inlet temperatures in check even on chipped cars. As used on our own demo car to achieve 274bhp on an independant rolling road with this intercooler, our Forge intake and Forge tuning software, its more than capable. Valmistaja ForgeAutoihin:
VW-Scirocco-2.0 TSI 200hp

VW Scirocco R - Forge TwintercoolerKLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
The latest VW Scirocco R 2.0 TSI petrol engine is now catered for with our market leading \'Twintercooler\' - a design that runs our front mounted intercooler in parallel with the existing stock intercooler for amazing cooling power. Giving a drop in ambient (cruise) temperatures of 5 degrees centigrade and boosted drops of over 15 degrees centigrade, this is a sure way of keeping your inlet temperatures in check even on chipped cars. Dyno testing has proved an increase in power and torque in even low ambient temperatures, with the maximum gains on chipped or reprogrammed ECU vehicles.Autoihin:
VW-Scirocco-R 261hp

VW Transporter T5 - Forge Intercooler KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Uprated front mounting intercooler for the VW T5 bus or van variants. Although significantly larger than the original intercooler this unit is a direct plug in replacement requiring no additional hoses or pipework. With a larger front cross sectional area the cooling / power recovery is improved. The unit offers a lower resistance, compared to OEM without adding turbo lag. On our own van we gained 10hp and 20 ft/lbs of torque with just the intercooler and all who drive the vehicle since the installation have commented on how better it feels. For those that have used a tuning box, or have updated engine management software, this really is a must. Fits the following engines: 85bhp 1.9TDI, 105bhp 1.9TDI, 130bhp 2.5TDI and 170bhp 2.5TDI. Valmistaja Forge. Autoihin:
VW-Transporter / Caravelle / Multivan-T5 1.9 TDI PD 86hp
VW-Transporter / Caravelle / Multivan-T5 2.5 TDI PD 131hp
VW-Transporter / Caravelle / Multivan-T5 2.5 TDI PD 174hp


copyright 2002-2011, Doc Power Oy varaa oikeuden hinnanmuutoksiin ilman erillistä ilmoitusta