Valitse autosi: 
Näytetään kaikki tuotteet.
Forge 1.2 Gallon Dash 12 Male Fittings 155mm Dia X 400mm KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Valmistaja Forge.Autoihin:


Forge Oil catch tank system - VAG 2.0 litre FSi ( with a carbon filter installed )KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Excess crankcase pressure is vented from the crankcase through the PCV system, where it is drawn into the intake manifold and returned by the engine. This recirculated air contains aerated oil from the crankcase which is burned by the engine. Turbo charged engines often draw significant amounts of oil into the engine through the PCV system. This oil catch tank system removes aerated oil so that it can be drained and recycled. This kit is suitable for intallation to the 2 litre FSi engines found in the VW MK5 Golf , MK5 Golf Edition 30 and SEAT Leon Cupra ( not for engine codes CCTA CBFA ) The kit is available in two versions, as in different geographic locations these vehicles are fitted with a carbon filter, located at the front of the engine bay ( on the left as you open the bonnet / hood ). Valmistaja Forge. Autoihin:
Audi
Seat
Skoda
VW

Forge Oil catch tank system - VAG 2.0 litre FSi ( without carbon filter )KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Excess crankcase pressure is vented from the crankcase through the PCV system, where it is drawn into the intake manifold and returned by the engine. This recirculated air contains aerated oil from the crankcase which is burned by the engine. Turbo charged engines often draw significant amounts of oil into the engine through the PCV system. This oil catch tank system removes aerated oil so that it can be drained and recycled. This kit is suitable for intallation to the 2 litre FSi engines found in the VW MK5 Golf , MK5 Golf Edition 30 and SEAT Leon Cupra ( not for engine codes CCTA CBFA ) The kit is available in two versions, as in different geographic locations these vehicles are fitted with a carbon filter, located at the front of the engine bay ( on the left as you open the bonnet / hood ). Valmistaja Forge. Autoihin:
Audi
Seat
Skoda
VW

VW Golf 5 R32 - Forge Oil Catch Tank Kit KLIKKAA TÄSTÄ JA KATSO HINTA UUSILTA SIVUILTAMME!
Saatavana Mustilla ja sinisillä letkuilla. Excess crankcase pressure is vented from the crankcase through the PCV system, where it is drawn into the intake manifold and returned by the engine. This recirculated air contains aerated oil from the crankcase which is burned by the engine. Turbo charged engines often draw significant amounts of oil into the engine through the PCV system. This oil catch tank system removes aerated oil so that it can be drained and recycled.\r\nIf you have ever wondered just how efficient these kits are at removing the sludge and oil, take a look at this. Aerated vapors in the blow-by gases are only partially responsible for intake valve deposits. Installation of this product will only partially limit the potential for these deposits to occur. Intake valve deposits can still form to some degree due to seepage of oil from the intake valve guides. Valmistaja Forge.Autoihin:
VW-Golf 5-R32


copyright 2002-2011, Doc Power Oy varaa oikeuden hinnanmuutoksiin ilman erillistä ilmoitusta